C-5 is a combustion manager
that is formulated to address combustion side fuel problems.
Its primary function is to cause a more complete burn of the
fuel after the ignition cycle begins. C-5
contains vigorous multi-functional components, which act as deposit
modifiers and combustion surface modifiers.
C-5 is a deposit and combustion
surface modifier designed to prevent deposit build-up in internal
combustion engines of all types. The deposit and combustion surface
modifiers catalyze (reacts with) the combustion and removes existing
deposits. This action also inhibits the formation of agglomerated
particles (hard carbon deposits) in new engines. Benefits include:
reduced smoking, increased power and performance, improved fuel
economy, reduced emissions, cleaner oil, reduced maintenance
cost, reduced wear, and lower friction.
C-5 is designed for bulk
fuel treatment in small-scale treatment programs. One gallon
will treat 5,000 gallons of fuel. If used in individual vehicles
the dosage rate is 1 fluid ounce to 40 gallons of fuel. Over
treatment will not improve performance and is not cost effective.
For this reason it is not recommended. However, over treatment
will not cause harm. Even concentrations of 15 times the recommended
level,will not cause harm provided
it is not allowed to continue for extended periods of time.
C-5 is intended for use
in all hydrocarbon fuels from gasoline to #6 oil. Due to the
unique nature and action of the active ingrediants the dosage
rate is the same for all. This makes C-5
the best choice for fleets that have a variety of fuel uses with
no existing fuel storage problems. C-5
is a combustion side burn rate modifier that promotes a clean
and complete burn of all fuel in the combustion chamber. That
is why it can be used in all fuel applications.
C-5 is recommended for
stable fuels of all types where microbial growth (fuel algae)
in the fuel storage tank, and low lubricity due to low sulfer
and low aromatics, is not a problem. If any of these problems
exist or are suspected, other products such as CL-5 and CAL-5 are available. Please see
the information on these products to choose the correct formula
for your particular application. If you have any questions regarding
the correct application of FUEL-TEK products, please call
our toll free number and a company representative will be happy
to assist you.
C-5 is also available
in a more concentrated version and is designated C-10
(1:10,000 ration). C-10 is
designed for large-scale treatment programs.